Kronoterm HM-130 S1, Инструкция по установке, использованию и техническому обслуживанию

Страница: 20 / 60

20
3. If you are installing HM-140 S1 or HM-130 S1, continue on chapter 3.4.1. If you
are installing HM-180 S1, continue on chapter 3.4.2.
3.4.1 COOLING CONNECTION WITH THE OUTDOOR UNIT - HM-
140 S1 AND HM-130 S1.
4. Connect the manometer and drain the N
2
from the device.
5. Unscrew the bolts on the end of the pipe and save them. You will use them to
mount the pipes.
6. Cut the connecting pipes to the required length. When cutting, consider the
following:
Use a pipe cutter which does not leave chips to cut the pipe.
The cut must be perpendicular to the pipe
’s axis and straight.
1 Copper pipe 3 Uneven
2 Inclined 4 Rough
7. Deburr the end of the pipe:
Remove all chips from the part where the pipe was cut.
Hold the pipe downwards during deburring so that the chips do not fall into
the pipe.
1 Copper pipe 3 Deburring tool.