Kronotech BLUEBOX GEN2 M30 UHF Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 51

Kronotech BLUEBOX GEN2 M30 UHF Скачать руководство пользователя страница 44

B5U027115E

GEN2 M30 UHF Serial-J1939 Manual – Rev. 1.15

Page 44 of

51

Date

Revision

Description

specifications and RF parameters configuration description.
Added CAN bus readers technical specifications.
Added warnings in ‘spontaneous’ message management in

operating features.
Added the ‘spontaneous’ message activation on CAN bus

interface description in operating features.
Added the selection of CAN bus interface as ‘spontaneous’

message interface in ‘spontaneous’ message configuration.
Added the RF sensitivity test, read reflected power and
read RSSI test modes description in operating features

section.
Added the CAN bus interface configuration parameters

description.
Added CAN bus readers connection specifications.

01/08/18

1.06

Updated the reader’s firmware versions object of this

manual in preface section.
Minor changes in operating features.
Minor changes in general and configuration parameters.
Added the RSSI info activation flag in RF configuration.

12/09/18

1.07

Updated the reader’s firmware versions object of this

manual in preface section.
Minor changes in operating features.
Minor changes in general and configuration parameters.
Minor changes in status indications.
Added the AFI management in EPC C1G2 configuration.

16/10/18

1.08

Updated the reader’s firmware versions object of this
manual in preface section.
Added configuration for the “spontaneous” message format

22/10/18

1.09

Updated  the  reader’s  firmware  versions  object  of  this
manual in preface section.
Added  the  tag  read  count  info  activation  flag  in  RF
configuration.
Corrections  in  operating  features  and  configuration

parameters.

30/10/18

1.10

Updated the reader’s firmware versions object of this

manual in preface section.
Changed description in “spontaneous” message format

field in spontaneous message configuration.
Added ASCII mode setup for the “spontaneous” message

«
...
42
43
44
45
46
...
»

Содержание BLUEBOX GEN2 M30 UHF




















































Отзывы:

Нет отзывов