B5U027115E
GEN2 M30 UHF Serial-J1939 Manual – Rev. 1.15
Page 19 of
51
Parameter
Description
Range
Default
Refer to country specific regulations for
channel allocation within the band. You, the
user, are responsible to ensure operation with
the correct RF settings and are solely responsible
for any fines and other damages due to incorrect
or non-compliant country/region settings.
Antenna 1
Activation
Activation of antenna 1.
Disabled
Enabled
Enabled
RF Channel
Allocation
Time
The
maximum
period
of
consecutive
transmission on the same RF channel.
Note that 0 value stands for default settings
of the selected region.
Refer to country specific regulations for
limitations. You, the user, are responsible to
ensure operation with the correct RF settings and
are solely responsible for any fines and other
damages due to incorrect or non-compliant
country/region settings.
0.00 … 0.99
seconds
0 … 99
seconds
0
RF Channel
Pause Time
The minimum time between two consecutive
transmissions in the same RF channel.
Note that 0 value stands for default settings
of the selected region.
Refer to country specific regulations for
limitations. You, the user, are responsible to
ensure operation with the correct RF settings and
are solely responsible for any fines and other
damages due to incorrect or non-compliant
country/region settings.
0.00 … 0.99
seconds
0 … 99
seconds
0
RF Chip
Standby Mode
Activation / deactivation of the standby mode of
the RF chip during RF off conditions to reduce
power consumption and temperature increase.
Disabled
Enabled
Enabled
RSSI
Information
The detection tag’s signal RSSI I and Q
measured values information.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Disabled
Max RSSI
Information
The detected tag’s signal max RSSI I and Q
measured values information.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Disabled
Tag Read
Count
Information
The tag read count information.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Disabled
