Kronotech BLUEBOX GEN2 M30 UHF, Руководство пользователя, Страница: 14 / 51

B5U027115E GEN2 M30 UHF Serial-J1939 Manual – Rev. 1.15 Page 14 of 51
Parameter Description Range Default
Note that 0 setting is internally overwritten
with 1 second.
0 … 99 min
Reading
Antenna
Information
To add the reading antenna information to the
tag’s code.
Disabled
Enabled
Disabled
Transponder
Type
Information
To add the transponder type information in the
tag’s code.
Disabled
Enabled
Disabled
‘Spontaneous’
Mode
Spontaneous mode.
Disabled
Enabled
Disabled
‘Continuous’
Mode
‘Continuous’ mode.
Disabled
Enabled
Enabled
The general parameters are managed through the ‘Read General Parameters’
and ‘Write General Parameters’ commands as described in protocol technical
manuals where the parameters 1…7 fields with default values are:
1 2 3 4 5 6 7
Device
Address
Serial1 Serial2 0x00 0x00 Filter Time
Functional
Flags
0xFF 0x48 0x10 0x00 0x00 0x01 0x80
Where:
Parameter Description
Device
Address
Device address of the reader on serial interface in the range 0 … 255.
Serial1
Serial interface communication settings.
• High nibble: baud rate:
o
0x0: 1200 bps;
o
0x1: 2400 bps;
o
0x2: 4800 bps;
o
0x3: 9600 bps;
o
0x4: 19200 bps;
o
0x5: 38400 bps;
o
0x6: 57600 bps;
o
0x7: 115200 bps.
• Low nibble: data bits:
o
0x7: 7 bits;
o
0x8: 8 bits.