Kronotech BLUEBOX GEN2 M30 UHF, Руководство пользователя

Страница: 29 / 51

B5U027115E GEN2 M30 UHF Serial-J1939 Manual – Rev. 1.15 Page 29 of 51
Parameter Description
Hops
Min Tune
Frequency
Hops
The minimum RF frequency hops on different RF frequency after RF tuning.
Tune
Hysteresis
Index
The runtime RF tune hysteresis index of measured reflected power.
3.3 Device Status
The information about the current status of the BLUEBOX shall be read with
the ‘Read Device Status’ command as described in protocol technical manuals
where the status bytes 1 and 2 have the following meaning.
Status Byte Description
Status Byte 1
Byte whose bits have the following meaning:
 Bit 7: Not used
 Bit 6: Not used;
 Bit 5: RF status (0=off, 1=on)
 Bit 4: ‘Continuous’ mode (1=enabled)
 Bit 3: Not used
 Bit 2: Not used
 Bit 1: Not used
 Bit 0: Not used
Status Byte 2
Byte whose bits have the following meaning:
 Bit 7: Not used
 Bit 6: Not used
 Bit 5: Not used
 Bit 4: Solder jumper W1 (1=closed)
 Bit 3: Not used
 Bit 2: Not used
 Bit 1: Not used
 Bit 0: Not used