Krone Coil Liner Скачать руководство пользователя страница 96

Страница: 96 / 192

SUPERSTRUCTURE OPERATION

Operating instructions • Semitrailer • 505369471-04 • 02/2019

INFO

If lighting equipment is fitted to the board
walls when they are removed (e.g. edge
markers), these must be reproduced on
the vehicle.

► Fold the board wall down by approxim-

ately 135°.

Fig. 6-60:

Folding down the board wall

► With a second person, slide off the

board wall to the right.

The board wall has been removed.

Inserting the board wall

► With a second person, slide the board

wall onto the hinges from the right-
hand side.

► Fold up the board wall.

The board wall has been inserted.

6.2.10

Centre posts

WARNING

Risk of accident from falling loads due
to unsecured posts!

Inadequately secured posts can lead to a
loss of load and can therefore cause injur-
ies and material damage.

► Lock and secure the posts before

travel.

WARNING

Risk of accident caused by loads
pressing against the posts!

The load can fall out when the posts are
unlocked. Load falling out can cause injur-
ies and material damage.

► Ensure that no loads are pressing

against the posts.

► Unlock the posts with caution.

► Hold the posts when unlocking out-

side of the swivelling area.

CAUTION

Risk of injury when closing and locking
the centre posts!

There is a crushing hazard when closing
and locking the centre posts.

► Wear protective gloves.

► Press the locking lever downwards

with the palm of your hand.

► Do not grab the locking lever.

CAUTION

Risk of injury when opening the lock-
ing lever!

The locking levers on the posts are under
tension. There is the risk of crushing when
opening the locking lever.

► Hold the locking lever with one hand

when opening.

NOTE

Improperly positioned posts can cause
material damage!

On vehicles with a sliding curtain super-
structure, incorrectly positioned or incor-
rectly plugged in posts can cause damage
to the roof frame and curtain while driving.

► Evenly distribute and lock the posts

throughout the entire length of the
load after the loading procedure. Ob-
serve the designated positions for the
posts.

Содержание Coil Liner

































































































































































































Результаты поиска

Содержание Coil Liner

Отзывы:

Похожие инструкции для Coil Liner

Бренды по названию

Популярные бренды

Krone Coil Liner, Руководство по эксплуатации

Результаты поиска

Содержание Coil Liner

Отзывы:

Похожие инструкции для Coil Liner

Бренды по названию

Популярные бренды