Krone Coil Liner Скачать руководство пользователя страница 121

Страница: 121 / 192

ROAD OPERATIONS

Operating instructions • Semitrailer • 505369471-04 • 02/2019

121

Road operations

7.1

Commissioning before each
trip

Commissioning before each trip ensures
road safety and includes a check before
driving off and after loading and unloading.

► Perform a departure check prior to

starting each trip:

Are the documents for the tractor unit
and trailer at hand?

Are the tractor and trailer in the com-
bination suitable for the transport task?

Is there sufficient clearance between
the vehicles so that the connection
lines are not functionally impaired and
can move freely?

Are the applicable regulations for driv-
ing on public roads observed with the
transport tasks?

Have all accident prevention regula-
tions been complied with?

Are all the supply and control connec-
tions properly made between the
tractor and the trailer?

Is the semitrailer or trailer coupling
locked and secured correctly?

Has the functional test of the EBS
brake system been audibly heard?

Are all the vehicle components (such
as wheel chocks, storage boxes, land-
ing leg winches) present, properly
fastened or closed and secured?

10. Are all movable collision protections

locked and secured?

11. Is the load properly distributed and

correctly secured?

12. Has the permitted maximum total

weight been adhered to?

13. Is there sufficient clearance between

the vehicle floor and the tyres?

14. Is the air suspension in the driving po-

sition?

15. Is the permitted vehicle height com-

plied with?

16. Are lighting and signalling systems

fully operational?

17. Are the tyres inflated to the correct

pressure?

18. Has the trailer's parking brake been

disengaged?

19. Is the compressed air supply for the

trailer's brakes sufficient?

20. Are the landing leg winches retracted

and secured?

21. Are the compressed air tanks drained?

22. Does the warning lamp/warning dis-

play in the tractor indicate that the
trailer's braking system is error free?

► Fix any observed defects.

► Only drive the tractor unit and trailer

when road safety is ensured.

7.2

Coupling and uncoupling
the trailer

DANGER

Danger to life due to crushing!

People can be crushed between the
tractor and trailer when coupling and un-
coupling.

► Instruct persons to leave the danger

area between tractor unit and trailer.

► Ensure that any guide person present

stays far enough away to the side
from the vehicles.

Содержание Coil Liner

































































































































































































Результаты поиска

Содержание Coil Liner

Отзывы:

Похожие инструкции для Coil Liner

Бренды по названию

Популярные бренды

Krone Coil Liner, Руководство по эксплуатации

Результаты поиска

Содержание Coil Liner

Отзывы:

Похожие инструкции для Coil Liner

Бренды по названию

Популярные бренды