Krone Coil Liner Скачать руководство пользователя страница 165

Страница: 165 / 192

LOADING AND SECURING

Operating instructions • Semitrailer • 505369471-04 • 02/2019

165

Inserting the pallet roller into the perfor-
ated rail

Fig. 8-71:

Inserting the pallet roller

Pallet rollers

Sliding rail

Mounting hole

► Remove the perforated rail cover.

► If necessary, remove the dirt from the

perforated rails.

► Insert the pallet roller into the perfor-

ated rails.

The pallet roller is inserted in the per-
forated rails.

Lifting up the pallet

Fig. 8-72:

Inserting a control lever into the
pallet roller

Control lever

► Insert the control lever with the lock

positioned downwards into the mount-
ing hole.

Fig. 8-73:

Lifting up the pallet

Control lever

► Swivel the control lever downwards.

► The pallet is lifted.

Lowering the pallet

► Insert the control lever with the lock

positioned downwards into the mount-
ing hole.

► Swivel the control lever upwards.

The pallet is lowered.

Shifting the load

► Shift the load.

The load is shifted.

Pulling the load

► Swivel the auxiliary handle on the con-

trol lever downwards.

► Pulling the load.

The load has been pulled.

Содержание Coil Liner

































































































































































































Результаты поиска

Содержание Coil Liner

Отзывы:

Похожие инструкции для Coil Liner

Бренды по названию

Популярные бренды

Krone Coil Liner, Руководство по эксплуатации

Результаты поиска

Содержание Coil Liner

Отзывы:

Похожие инструкции для Coil Liner

Бренды по названию

Популярные бренды