MAL-OPS-0927 Revision 4.0 Page 27 of 52
6.2.5 Re-Pairing
To re-pair the smartphone and D3S, the
detector needs to enter Bluetooth pairing
Mode.
a) Turn the D3S off and wait for at least
5 seconds.
b) Hold the D3S button down for 6-8
seconds until the indicator light
switched from yellow to purple.
c) Turn phone Bluetooth on and search
for the D3S serial number. Under
‘Available
devices’ select the
corresponding D3S serial number to
pair with the phone. If the D3S is not
listed under the ‘Available devices’,
select ‘Scan’ from the top right corner
of the screen to initiate a scan to
detect the D3S device.
d) If the D3S is still not listed under the
‘Available devices’ once the scan is
complete, use the toggle switch below
‘Scan’ to turn Bluetooth off and on
again, then repeat step c.
e) The D3S detector will stay pairable
(purple indicator light) until a device
successfully pairs or 60 seconds
elapses.
f) Open the D3S ID app. Perform the
steps in Section 6.2.2 Bluetooth
Содержание D3S ID
Страница 1: ...D3S ID User Manual ...
Страница 50: ...MAL OPS 0927 Revision 4 0 Page 50 of 52 ...
Страница 51: ...MAL OPS 0927 Revision 4 0 Page 51 of 52 ...