MAL-OPS-0927 Revision 4.0 Page 6 of 52
1.1 Warm-up Time
Warm-up time is the time required for the D3S
ID to become fully functional from a dead start
(off state).
This involves switching the already
paired D3S detector and smartphone on,
opening the D3S ID application and for
the status to be connected and ready. This is
indicated by the tick mark at the bottom right
hand side and that gamma and neutron dose
rate are displayed.
The warm-up time is ~40 seconds.
2 Charging the D3S
The D3S detector can be charged by connecting power via the USB cable or by
placing the D3S into the Kromek induction charging station.
2.1 USB Charging
When power is connected via the USB cable, the D3S will start charging and the
indicator light will pulse until it is fully charged then it will solidly illuminate.
If the D3S is powered off while charging, the indicator light will be white.
Содержание D3S ID
Страница 1: ...D3S ID User Manual ...
Страница 50: ...MAL OPS 0927 Revision 4 0 Page 50 of 52 ...
Страница 51: ...MAL OPS 0927 Revision 4 0 Page 51 of 52 ...