INSTALLATION
3
19
OPTISYS TUR 1060
www.krohne.com
01/2019 - 4007152501 - MA OPTISYS TUR 1060 R01 en
3.4.5 Water intake
Select a hose diameter of 1/4 inches OD (polyethylene or polypropylene). Make sure that the
hose is long enough to connect the drain directly to a suitable location. Ensure that there are no
kinks, twists, fractures or damage of any kind in the hoses.
Slide the hose into the Quick Connect fitting on the right-hand side and check that the hose is
completely pressed against the stop.
Pull carefully but firmly on the pipe to check if it is secured.
3.4.6 Drain vent
Select a hose diameter of 1/4 inches OD (polyethylene or polypropylene). Make sure that the
hose is long enough to connect the drain directly to a suitable location. Ensure that there are no
kinks, twists, fractures or damage of any kind in the hoses.
Slide the hose into the Quick Connect fitting on the right-hand side and check that the hose is
completely pressed against the stop.
Pull carefully but firmly on the pipe to check if it is secured.
CAUTION!
Only water which is free of corrosive chemicals or other dangerous substances may be used.
CAUTION!
The device must be routed to a suitable sanitary sewer drain.
Do not return the drain sample or any water into the process stream or into any potable water
supply.
