SERVICE
7
19
BM26A-5000
www.krohne.com
01/2021 - 4008339901 - HB BM26A-5000 R01 en
7.1 Periodic maintenance
This device does not normally need maintenance. If the liquid is contaminated or build-up of
deposits is possible, we recommend that you flush the device regularly.
How to flush the device
•
Open the drain plug or drain valve.
•
Flush the chamber.
i
End of the procedure.
7.2 Service warranty
Maintenance is not necessary for most applications.
Servicing by the customer is limited by warranty to
•
screws, nuts, studs, gaskets and counter flanges for flanged connections
•
male and female plugs for drains and vents
•
ball valves
•
support brackets for the bypass chamber
Use only KROHNE-authorized service staff to repair the device.
7.3 Availability of services
The manufacturer offers a range of services to support the customer after expiration of the
warranty. These include repair, maintenance, technical support and training.
WARNING!
The device must be regularly serviced to conform to the rules and regulations applicable to the
site that it is installed on.
WARNING!
Follow accident prevention regulations carefully when you do work near pressurized tanks and
dangerous chemical products.
WARNING!
If you open the drain valve, make sure that you close the tank isolation valves first.
WARNING!
If the bypass chamber has Ring Joint gaskets, then make sure that you replace the gasket each
time that you remove the bottom flange.
INFORMATION!
For more precise information, please contact your local sales office.
