SAFETY INSTRUCTIONS
1
7
BM26A-5000
www.krohne.com
01/2021 - 4008339901 - HB BM26A-5000 R01 en
•
The effective pressure of the installation (the maximum pressure permitted by the pressure-
limiting valve) must never be more than the maximum permitted pressure, PS. PS is marked
on the device nameplate.
•
Make sure that the parts in contact with the fluid are compatible with the fluid and conform to
the ageing characteristics of the measurement environment and the fluid used. These have
either been recommended in the instructions or form the subject of a particular specification
in the contract.
•
The device is designed to measure a liquid with a gas phase. It is not designed to measure
liquids that change to a solid phase because of changes in pressure (solidification) and
temperature (freezing), e.g. water and ice.
•
Make sure that there are no magnetic particles in the liquid. These particles can have an
effect on the performance of the device.
•
Make sure that the size of the particles in the liquid are less than 0.05 mm / 0.002
¨
in
diameter.
•
Make sure that the device is correctly sealed. Do a leakage check between the device and the
tank.
•
The external pressure, Pext, must be equal to atmospheric pressure, Patmos (Pext =
Patmos).
1.4 Safety instructions from the manufacturer
1.4.1 Disclaimer
The manufacturer will not be liable for any damage of any kind by using its product, including,
but not limited to direct, indirect or incidental and consequential damages.
This disclaimer does not apply in case the manufacturer has acted on purpose or with gross
negligence. In the event any applicable law does not allow such limitations on implied warranties
or the exclusion of limitation of certain damages, you may, if such law applies to you, not be
subject to some or all of the above disclaimer, exclusions or limitations.
Any product purchased from the manufacturer is warranted in accordance with the relevant
product documentation and our Terms and Conditions of Sale.
The manufacturer reserves the right to alter the content of its documents, including this
disclaimer in any way, at any time, for any reason, without prior notification, and will not be liable
in any way for possible consequences of such changes.
