Dismantling the Spray Gun
1. Remove screw. (spare part
1
,
page 15-16
) (picture
3,
page 2
)
2. Separate the motor housing (spare part
6
) from the pump section. (picture
4
)
3. Unscrew nozzle (spare part
3
). Take suction pressure valve (spare part
4
) and pump plunger (spare
part
8
) with spring (spare part
7
) out of the pump section.
Do not use force.
(picture
5
)
4. Remove the valve ball from the pump by using a copper or brass pin to push it through the piston
aperture. (picture
6
)
5. Place all parts in the appropriate detergent and clean them.
Never use hard objects for cleaning! The piston (spare part
8
) should move easily in the pump
housing.
Assembling the Pump
Assemble the parts in the reverse order.
After cleaning, spray through the spray gun brie
fl
y with vegetable oil as an anticorrosion measure.
Collect cleaning agents in an appropriate receptacle and dispose of in an appropriate manner.
EN Declaration of Conformity CE
We con
fi
rm that this product meets the required standards as set out in the following norms:
EN 50144-1:98 + A1:02 + A2:03, EN 50144-2-7:00, EN 50366:03 + A1:06,
EN 55014-1:06 + A1:09 + A2:11, EN 55014-2:97 + A1:01 + A2:08, EN 61000-3-2:06 + A1:09 + A2:09,
EN 61000-3-3:08, EN 62233:08
8
Guarantee
The spray gun is guaranteed for six months subject to the enclosed terms and on condition that
it is
only used for processing products approved for the food industry.
The spray gun must not be operated continuously for longer than 10 minutes at a time.
The guarantee is based on 50 hours of use within a 6-month period.
Only original spare parts may be used in the event of repairs.
The spray gun must be serviced and cleaned as described in the operating instructions.
The guarantee becomes valid with the delivery of the product to the end user.
The duration of the guarantee shall be determined by the end user‘s date of purchase. The
guarantee excludes any damage due to natural wear, overloading or incorrect handling.
Repairs
not covered by the guarantee shall be performed by service centres subject to the
applicable price and delivery terms of the country in question.
Product liability
No liability is accepted for damage caused directly or indirectly by the use and spraying of
products. The user assumes full responsibility for the use of the product in accordance with the
laws of food hygiene and other legal regulations.
A. Hitschrich
Dr. S. Kendrick
