WARNING!
Risk of injury due to improper cleaning!
Detergents may be harmful to one's health and be easily flammable. Furthermore, seals of the
diaphragm pump can be destroyed.
Note:
–
Adhere to the safety data sheets of the cleaning product manufacturer.
–
Do not use any high-pressure cleaning devices.
7.
Clean contact surfaces of the diaphragm cover.
8.
Screw the new diaphragm ( Fig. 10/3) firmly into the control pin ( Fig. 10/4).
9.
Attach the diaphragm cover ( Fig. 10/2).
10.
Lightly grease all 4 screws ( Fig. 10/1) and screw tight (
Tightening torque: 20 Nm
).
11.
Install the bridges and valve parts (
Chapter 7.5 ‘Replace valve parts’ on page 31
).
12.
Chapter 6.4 ‘Start-up’ on page 27
Operating instructions
T-Dok-397-GB-Rev.2
[email protected], www.krautzberger.com
GB–34
