5 Installation and disassembly
5.1 Safety
Personnel:
n
Specialised personnel
n
Trained electrician
Protective equipment:
The selection of the protective equipment depends on the installation conditions on site. Always
observe the applicable country-specific safety, accident prevention, occupational safety, and envi-
ronmental protection regulations for the proper selection of the protective equipment.
WARNING!
Risk of injury due to improper installation!
Improper installation may cause serious personal injury or material damage.
Note:
–
Ensure ample of space for the installation prior to starting any work.
–
Carefully handle open, sharp-edged components.
–
Maintain order and cleanliness at the installation site. Components that are loosely
stacked or are scattered around can cause accidents.
–
Assemble components properly. Adhere to specified screw tightening torque.
–
Secure components against tipping or falling.
–
Ensure that the utilised hose lines meet the requirements for pressure, chemical and
mechanical loads. At the same time, adhere to the spray media manufacturer's specifica-
tions in the safety data sheet.
CAUTION!
Risk of injury through compressed air!
Uncontrolled leaks of compressed air can lead to serious injuries!
–
Prior to any work on the device, all compressed-air lines must be closed and bleed if nec-
essary.
Operating instructions
T-Dok-397-GB-Rev.2
[email protected], www.krautzberger.com
GB–16