1.
Clean diaphragm pump (
Chapter 7.4 ‘Clean the diaphragm pump’ on page 30
2.
Make sure that the compressed air supply is switched off and secured against a restart.
3.
Reduce the material pressure by activating the extraction point.
Fig. 6: Disassembly
4.
Disconnect the compressed-air supply from the compressed-air connection point ( Fig. 6/4).
5.
Disconnect the material intake hose from the material intake connection (material intake) (
Fig. 6/3).
6.
If necessary, disconnect the surge tank from the connection ( Fig. 6/1).
7.
Disconnect the material pressure hose at the material pressure connection (material outlet)
( Fig. 6/2 or 5).
Operating instructions
T-Dok-397-GB-Rev.2
[email protected], www.krautzberger.com
GB–22
