Krautzberger MP-520, Руководство по эксплуатации

Страница: 32 / 53

WARNING!
Risk of injury due to improper cleaning!
Detergents may be harmful to one's health and be easily flammable. Furthermore, seals of the
diaphragm pump can be destroyed.
Note:
– Adhere to the safety data sheets of the cleaning product manufacturer.
– Do not fully immerse the valve housing in cleaning product.
– Do not use any high-pressure cleaning devices.
9. Clean the outside of the valve housing with a cloth soaked in cleaning product.
10. Install all valve parts ( Fig. 9/3 to 6) in the sequence shown.
11. Attach the bridge ( Fig. 9/2).
12. Screw the hexagon screws ( Fig. 9/1) tight.
13. Clean the diaphragm pump ( Ä Chapter 7.4 ‘Clean the diaphragm pump’ on page 30 ) and
perform a test run (
Ä
Chapter 6.4 ‘Start-up’ on page 27 ).
Operating instructions
T-Dok-397-GB-Rev.2
mail@krautzberger.com, www.krautzberger.com GB–32