Krautzberger 200-0356, Руководство по эксплуатации

Страница: 31 / 45

15. Place circlip ( Fig. 20/21) into the groove of the actuation shaft ( Fig. 20/4).
16. Insert the support ring ( Fig. 20/20) and seal ( Fig. 20/19).
Fig. 21: Assembling gear box
17. Coat sealing surfaces ( Fig. 21/X) and the threads of the screws ( Fig. 21/27) with surface
sealant (e.g. Würth surface sealant Orange).
18. Insert intermediate gear wheel ( Fig. 21/5) with shim ( Fig. 21/14) into the needle sleeve (
Fig. 21/13).
19. Carefully slip gear box housing ( Fig. 21/1) onto the bearing cover. Ensure that the gear
wheels interlock properly.
20. Screw in gear box housing ( Fig. 21/1) with the screws ( Fig. 21/27) and discs ( Fig. 21/26)
at the bearing cover (tightening torque:
Ä Chapter 12 ‘Technical data’ on page 39 ).
Pneumatic agitator RL 72
ENGLISH
Article no. ■ 200-0356 GB–31