Krautzberger 200-0356, Руководство по эксплуатации

Страница: 30 / 45

Fig. 19: Assembling gear box
10. If previously dismantled, insert the circlip ( Fig. 19/18*) from the inside into the 2nd groove
of the gear box housing ( Fig. 19/1).
11. Insert sealing ( Fig. 19/17).
12. Insert circlip ( Fig. 19/18) and push the outer ball bearing ring ( Fig. 19/16) to the end posi-
tion on the circlip ( Fig. 19/18).
13. If previously dismantled, insert the circlip ( Fig. 19/18*) from the outside into the gear box
housing ( Fig. 19/1) and press the ball bearing ( Fig. 19/15) to the end position on the circlip
( Fig. 19/18).
Fig. 20: Assembling gear box
14. Carefully insert actuation shaft ( Fig. 20/4) with inner ball bearing ring ( Fig. 20/16) into gear
box housing ( Fig. 20/1) to end position.
Operating instructions
T-Dok-031-GB-Rev.4
mail@krautzberger.com, www.krautzberger.com GB–30