Inserting the needle packing
Fig. 18: Inserting the needle packing
1.
Insert entire needle packing (Fig. 18/2) into the transition part (Fig. 18/3).
2.
Screw in the seal screw (Fig. 18/1).
3.
Place the seals (Fig. 18/5) onto the centring tubes (Fig. 18/4).
Fig. 19: Inserting the needle packing
4.
Insert the transition part (Fig. 19/3) into the main element (Fig. 19/2).
5.
Screw the transition part (Fig. 19/3) and main element (Fig. 19/2) together with the screw
(Fig. 19/1).
6.
Attach the fluid needle (
Chapter 7.4 ‘Changing the fluid needle’ on page 27
Operating instructions
T-Dok-144-GB-Rev.1
[email protected], www.krautzberger.com
GB–30