6.4
Setting the zero point of the needle stroke setting
Fig. 9
1.
Close the air feed.
2.
Turn the adjustment nut (Fig. 9/1) by turning clockwise.
3.
Open fluid feed.
4.
Open the control air feed.
5.
Slowly open the adjustment nut (Fig. 9/1) turning counter-clockwise until fluid escapes.
6.5
Operation breaks
1.
End the spray procedure by switching on the control air (connection "St").
The atomiser air (connection "Z") is automatically closed in the automatic spray gun.
2.
Interrupt the spray fluid supply.
3.
If necessary, clean the spray gun (
Chapter 7.2 ‘Cleaning spray guns’ on page 25
Automatic spray gun A-14
ENGLISH
■
200-0151
GB–23
