-4-
Do not use a power source exceeding
the machi
ne’s specified value, only use
220V AC power!
The outlet used for the machine’s
current must be greater than the
machine’s
specified
value;
otherwise
it
may
lead
to
overheating or fire.
When installing or repairing, the machine
must be disconnected from the power
source!
Otherwise it may lead to electric
shock.
Do not damage the power cord or
outlet!
Doing so may lead to electric
shock, short circuiting, or fire.
Do not touch the power plug with wet
hands!
It may lead to electric shock.
Notes
Product Introduction
Do not use the water purifier when the
sewer is blocked up!
If it is used while the sewer is
blocked, it may cause the
waste water to back up or
pollution to get inside the
water purifier.
The waste water discharge pipe and
wastewater ratio device cannot be
blocked!
When the waste water discharge
pipes and waste water ratio device
are clogged, it may lead to high
TDS effluent, the RO membrane
may get blocked or the water purifier may not work.
Water purifier inlet water temperature
should not exceed 38
℃
!
If
the
inlet
water
temperature is over 38
℃
, it
will damage the reverse
osmosis
membrane
leading
to
membrane
failure.
Do not use in conditions under 5
℃
!
If the temperature in the room is
below 5
℃
, please be sure to take
measures to prevent freezing,
such as starting the heater or air
conditioner to prevent leakage or cracked pipes
caused from water freezing inside the machine.
Do not use this water purifier outdoors!
If this water purifier is used
outdoors,
it
can
lead
to
accelerated aging of the water
purifier pipes and parts, which
can cause leaking or machine
failure.
Do not use the water purifier in direct
sunlight!
When the water purifier is in
sunlight for a period of time, it
may create a breeding ground
for microorganisms so the
water purifier water quality will
decrease, and they may pollute the internal
components of the water purifier.
