KRAUSE ClimTec, Инструкция по установке и эксплуатации

Страница: 40 / 327

Prior to assemble the scaffold, check all parts for damage. Replace defective or
damaged parts. Use only original spare parts.
Carry out a visual inspection, checking in particular for cracks in welds and other
parts of the material. Use only scaffold parts that are not bent or otherwise
deformed. Always ensure that component parts such as clamps, spindles,
castors, etc. are in proper working condition.
The following parts have to be checked before each assembly:
- Vertical frames, stabilisers with regard to Deformation, crushing and crack
formation
- Diagonal braces and rail braces with regard to Deformation, crushing, crack
formation and function of the safety unit
- Platforms with regard to Deformation, crushing, crack formation and function
of the safety unit, condition of the wood, function of the hatch/door
- Platforms with regard to Condition of the wood, cracking
- Castors with regard the rolling ability of the castor and the function of the brake
regarding roll and rotation stoppage. In case of adjustable castors regarding the
easy movement of the jack screw. Inspection of the safety of the vertical frame
resp. stabilizer (drop pin, wing screw)
- Safety sets of deformation, crushing, crack formation and the correct position
Prevent damage by refraining from throwing the parts.
The scaffold parts must be stored horizontal in such a way that they cannot be
damaged.
The individual parts must be stored in such a way that they are protected against
the elements.
For transport, place and secure the parts in such a way that they cannot be
damaged by shifting, bumping, falling down etc.
The scaffold parts can be cleaned with a conventional detergent. To remove paint,
use turpentine.
CAUTION
Ensure that detergents and solvents do not pollute the ground. Dispose of them
according to the applicable environmental protection regulations.
Maintenance and care
75 76
Building Gr
oup
Basic scaffold
Basic scaffold
with the first
extension
Basic scaffold
with the first
and the second
extension
Information on carrying capacity:
Only one board may be loaded at any time!
Dimensions and weights
Required packs: Basic scaffold prod. no. 710116 / 600004 / 2101
Castor kit (optional) 714169
Dimensions Length 1,50 m
Width 0,65 m
Max load of board 180 kg
Max. working height (B) 3,00 m
Max. scaffold height (A2) 1,95 m
Max. standing height (A1) 1,00 m
Total weight 31,0 kg
Required packs: Basic scaffold prod. no. 710116 / 600004 / 2101
first extension 710130 / 600011 / 2102
Castor kit (optional) 714169
according to ballast table page 71
Ballast weights (optional) 704306
or outriggers (optional) 714039
Dimensions Length 1,50 m
Width 0,65 m
Max load of board 180 kg
Max. working height (B) 5,00 m
Max. scaffold height (A2) 4,00 m
Max. standing height (A1) 3,00 m
Total weight 54,0 kg
Required packs: Basic scaffold prod. no. 710116 / 600004 / 2101
first extension 710130 / 600011 / 2102
second extension 710154 / 600028 / 2103
Castor kit (optional) 714169
according to ballast table page 71
Ballast weights (optional) 704306
or outriggers (optional) 714039
Dimensions Length 1,50 m
Width 0,65 m
Max load of board 180 kg
Max. working height (B) 7,00 m
Max. scaffold height (A2)) 6,00 m
Max. standing height (A1) 5,00 m
Total weight 84,0 kg