KRAUSE ClimTec, Инструкция по установке и эксплуатации

Страница: 30 / 327

Step-by-step installation instructions for the basic
scaffold with first extension
Step 1
Insert the stabilizer bars into the
basic frame and secure each of
them with 2 screw kits
(prod. no. 718891).
The maximum extension of the
girder is approx. 350 mm.
Step 2
Connect the two basic frames
with two rail braces.
Basic scaffold with first extension
55 56
Step 4
Insert the vertical
frame (2.0 x 0.65 m)
into the basic frame
and secure it with
gravity pins.
Stabilise the base frame
with a diagonal brace
attached to the 6th rung on
the one side and the 10th
rung on the other side.
Secure the diagonal braces
with safety sets.
Step 3
Connect the two basic frames
with the diagonal brace,
attaching it to the lowest rung
on one side and to the 5th rung
on the other side.
Basic scaffold with first extension
Securing of
scaffold with
gravity pins