Kranzle therm 1165-1, Руководство по эксплуатации

Страница: 19 / 31

36 37
3. Set desired temperature at the
thermostat. (Min. temperature 40 °C).
On the subject of thermostat settings,
see chapter "Functional details" in these
operating manual.
During high-pressure operation (above 30 bar) the temperature
may not exceed 90 °C.
During steam operation (90 - 150 °C) the pressure may not exceed
30 bar! To reach the steam level (above 90 °C water temperature)
adjust the pressure below 30 bar and choose by means of the
thermostat the desired temperature of up to max. 150 °C.
Usage as a hot water high-pressure cleaner
1. Detergent valve must be closed.
4. Switch on heater switch. The water is
heated up and constantly kept at the
set temperature.
Start with cleaning process.
Putting into operation Direct suction
Direct water extraction
Due to the suction capacity of its high-pressure pump (up to 2.5 m suction height,
max. hose length 3 m) this high-pressure cleaner can suck in water for cleaning
purposes from separate containers or ponds.
In this case the water tank must be bypassed.
Prior to starting the first suction the high-pressure pump and the
suction hose has to be filled with water!
Note
Depending on the water quality it may occur after a prolonged standstill
that the valves get sticky. Consequently the high-pressure cleaner cannot
properly suck in water from a container. In this case connect a hose with
pressurized water to the pump inlet. Having started the high-pressure
cleaner the pressurized water opens the valves and the machine resumes
sucking in water from the container. Now you can carry on with your
cleaning task as usual.
1. Unsrew connecting hose between
high-pressure pump and water tank.
3. Put filled suction hose into the water-
filled container and start the cleaning
job.
Use clean water only!
Never suck in water containing
chlorine! Do not suction air!
2. Screw suction hose with suction filter
(Item.-no.: 150383) with connecting
hose using a spreaded steel pipe fitting
(Item.-no.: 46004).
2. Switch on high-pressure cleaner with
opened trigger gun (trigger pulled).
Bleeding of the high-pressure cleaner:
Pull and release trigger of trigger gun
with safety catch several times.