Kramer Electronics Ltd.
VS-88H2A
– Defining VS-88H2A 4K HDMI 8x8 Matrix Switcher
5
Defining VS-88H2A 4K HDMI 8x8
Matrix Switcher
This section defines
VS-88H2A
.
Figure 1: VS-88H2A 4K HDMI 8x8 Matrix Switcher Front Panel
#
Feature
Function
The behavior of the front panel buttons and the 7-segment display changes along with the
operation modes. For further details see
Operating VS-88H2A via Front Panel Buttons
IN (PATTERN)
SELECTOR Buttons
Press to select the input (1 to 8) to switch after selecting an output (also
used for storing machine setups in the STO-RCL modes and for
selecting a pattern in the Pattern mode).
OUT (MUTE)
SELECTOR Buttons
Press to select an output (1 to 8) to which the input is routed. Also used
for storing machine presets.
MUTE/PATTERN Button Press to view the current pattern status and select the output/s to which
Routing a Pattern to the Output
Switching a Pattern to an Output
).
Press to mute audio or video on a selected output when
D-AUDIO/A-AUDIO, and/or VIDEO buttons are pressed (lit)
(see
).
ALL Button
Press to perform an action on all outputs (for example setting Mute
mode, Pattern mode and so on).
For switching, press ALL and then a specific IN button to route the
selected input to all outputs. For example, press ALL and then IN 2 to
route input 2 to all the outputs.
STO and RCL Buttons
Press STO to store the current switching setting to a preset button.
Press RCL to recall the switching setting from a preset button
(see
).
A-AUDIO Button
Press to enable analog audio routing. When pressed together with
VIDEO, the analog audio is routed together with the video signal.
D-AUDIO Button
Press to enable digital audio routing. When pressed together with
VIDEO, the digital audio is routed together with the video signal.
VIDEO Button
Press to select video inputs. When pressed together with
D-AUDIO/A-AUDIO, video is switched together with audio.
LOCK Button
Press and hold to toggle locking/releasing of the front panel buttons.
Press to save the following setups: HDCP (On/Off), ARC, Fast Switch
and Switch mode.
EDID Button
Press to capture the EDID (see
).
OUTPUT/INPUT
7-segment LED Display
Displays the selected inputs switched to the outputs (marked above
each input).
1
2
3
4
5
6
7
8
9
10
11