Kramer VS-88H2A, Руководство пользователя

Страница: 13 / 84

Kramer Electronics Ltd.
VS-88H2A
– Operating VS-88H2A via Front Panel Buttons
11
VS-88H2A setup processes timeout after 10 seconds.
The VS-88H2A front panel buttons enable performing the following functions:
▪
Routing Signals , on page 11 .
▪
Storing and Recalling a Setup , on page 23 .
▪
Setting Switching Mode , on page 24 .
▪
Setting Switching Speed , on page 24 .
▪
Setting HDCP , on page 24 .
▪
Copying EDID , on page 25 .
Routing Signals
You can switch the video and the audio signals together (AFV) or switch them separately, via
the following switching modes:
▪
Switching the Video Signal , on page 11 .
▪
Routing an Audio Input to the Analog Audio Output , on page 12 .
▪
Routing an Audio Input to the Digital HDMI Output , on page 14 .
▪
Switching Video and Audio Signal Simultaneously , on page 15 .
▪
Muting/Unmuting an Output , on page 16 .
▪
Routing a Pattern , on page 17 .
▪
Operating in ARC Mode , on page 18 .
Switching the Video Signal
The VIDEO button on the VS-88H2A front panel enables video routing.
To switch a video input to an output:
1. Press VIDEO .
The button illuminates and the 7-segment display shows the current IN-OUT video
status.
On the front panel buttons:
•
An illuminated input button means that an active signal is detected on that input.
•
An illuminated output button means that a display is connected to that output.
•
A flashing output button means that a non-HDCP display is connected to that output.
Note that in the case that an HDCP-encrypted input is routed through the matrix to a
non-HDCP screen, the video will not be presented and the non-HDCP screen will
turn black.