Kramer Electronics Ltd.
VS-88H2A
– Operating VS-88H2A via Front Panel Buttons
17
Routing a Pattern to the Output
VS-88H2A
generates 6 embedded patterns. These patterns can be routed at a resolution of
480p to any of the outputs.
Once a pattern is selected, that same pattern is routed to all the selected outputs.
A pattern is selected by pressing inputs 1 to 6 when in the Pattern mode.
1 (Color Bars)
2 (Solid Black)
3 (Solid White)
4 (Solid Red)
5 (Solid Green)
6 (Solid Blue)
Figure 6: VS-88H2A Embedded Patterns
To route a pattern:
1. Press
MUTE/PATTERN
.
On the front panel buttons:
•
An illuminated output button means that a display is connected on that output.
•
An illuminated input button indicates the current pattern selected.
On the 7-segment display:
•
“
P
” under an output number indicates that a pattern is routed to that output.
•
“
-
” under an output number indicates that a video input is routed to that output.
•
“
0
” under an output number indicates that the output is muted.
2. Press an
OUT (MUTE)
button (1 to 8).
The 7-segment display LED, under the selected output, flashes.
Press
ALL
(instead of an output button) to route a pattern to all the outputs. All the
7-segment display LEDs flash.
3. Press an input button to select a pattern (see
).
The 7-segment display shows the new pattern status.
Press
VIDEO
,
D-AUDIO
or
A-AUDIO
to exit pattern mode.
