Kramer Electronics Ltd.
VS-88H2A
– Operating VS-88H2A via Front Panel Buttons
10
Operating VS-88H2A via Front
Panel Buttons
Press the power switch
to power the device. During the 10-second initialization process,
the:
•
7-segment display LEDs are on.
•
All the front panel buttons illuminate.
•
The FPGA/EPLD version (P), the firmware version (F) and the build version (b) appear
in succession.
Following initialization, the front panel buttons and 7-segment display enter normal operation:
•
The 7-segment display shows the video IN-OUT status.
•
The current operation mode button illuminates (
VIDEO and D-AUDIO
, by default).
•
An illuminated
IN (PATTERN)
button indicates an active signal connected to the input.
•
An illuminated
OUT (MUTE)
button indicates that an acceptor is connected to the output.
By-default, the operation mode is set to VIDEO
and D-AUDIO
and both buttons
illuminate.
In general, the front panel buttons indicate the device operation modes follows:
Button
LED Status
Operation Mode
VIDEO
On
Video inputs are switched to video outputs.
D-AUDIO
On
Digital inputs (HDMI input audio) are switched to digital outputs
(HDMI output audio).
D-AUDIO
Flashing
Audio embedding: Analog audio inputs
are switched to digital
audio outputs (HDMI output audio).
A-AUDIO
On
Audio de-embedding: Digital audio outputs (HDMI input audio) are
switched to Analog audio outputs
.
A-AUDIO
Flashing
Analog audio inputs are switched to analog audio outputs.
VIDEO
On
Video and digital inputs (HDMI) are switched to video and digital
audio outputs (HDMI).
D-AUDIO
On
VIDEO
On
Video inputs (HDMI) are switched to video outputs and analog audio
inputs (AUDIO IN) are switched to digital audio outputs (HDMI).
A-AUDIO
On
D-AUDIO
On
HDMI output ARC audio is switched to analog audio output.
A-AUDIO
On
D-AUDIO
On
Analog audio input is switched to HDMI input ARC audio.
A-AUDIO
Flashing
D-AUDIO
Flashing
HDMI output ARC audio is switched to HDMI input ARC audio.
A-AUDIO
On
7
8
12
14
25
