MENU Commands Sequence
51
8.10
Setting the IR REMOTE Control
Set the IR REMOTE control to enable remote control of the
VS-1616V
16x16
Video Matrix Switcher
, using the
Kramer IR-1
Infra-Red Remote Control
Device
1
. Refer to the IR-1
Infra-Red Remote Control Device
user manual
2
, for
full details. Table 8 and Table 9 summarize the setup and operational commands.
Table 8: Summary of Basic IR-1 Setups
To execute this command:
Press the following keys in this sequence:
Allocate the
VS-1616V
to Group 12 SHIFT + GROUP + 12
Set the MACHINE #
UNIT + # key
3
(according to the
VS-1616V
dipswitch settings)
To enable IR REMOTE control (when set OFF), do the following:
1. Press the MENU button until reaching the IR REMOTE setting.
The MATRIX Display shows the message:
IR REMOTE setting
yes -> TAKE, next -> MENU
2. Press the
TAKE
button.
The Displays show the messages:
Outkey 1: InfraredREMOTE OFF
2: InfraredREMOTE ON
current:
remote OFF
3. Press the
OUT
button
2
.
The TAKE LED blinks and the Displays show the messages:
Turn ON infrared REMOTE ?
Press TAKE to execute
Current:
remote OFF
4. Press the
TAKE
button again.
The Displays show the messages:
Infrared REMOTE mode
changed
Current:
remote ON
Table 9: Summary of Basic IR-1 Operations
To execute this command:
Press the following keys in this sequence:
Switch an Input to an Output
# key (for the output) + # key (for the input)
4
Store/Recall a setup
SHIFT + STO/RCL + # key (for the setup)
1 After enabling the IR REMOTE control command, remotely control the VS-1616V via the IR-1 remote control transmitter
pointed at the remote receiver on the VS-1616V’s front panel (item 1 in Figure 2)
2 You can download it from the Internet at this URL http://www.kramerelectronics.com/manuals.html
3 For example, press UNIT + # 1 if the VS-1616V is set as MACHINE # 1
4 For example, press # 6 followed by # 2 to switch input 2 to output 6
