Kramer VS-1616V Скачать руководство пользователя страница 15

Страница: 15 / 65

Installing the Video Matrix Switcher

KRAMER ELECTRONICS, LTD.

inputs and 16 outputs. However, for s-Video (Y/C) configuration you need 2

VS-1616V

units to provide 16 inputs and 16 outputs.

In a multi-channel video switcher configuration, only one unit is the Master

(with DIP 6 OFF). The other units are Slaves (with DIP 6 ON).
The front panel of each Slave unit is always locked and the

MATRIX

and

STATUS

LCD Displays do not illuminate. The Slave units follow the Master.

The Master unit operates in the regular way

, leading the Slaves in the

background.
To activate a multi-channel video switcher so that each unit is in the same

state from the outset, do not turn on the power on the Slave units after the

Master unit.

Table 5: Multi-channel VS-1616V Configuration for CV, Y/C, YUV (RGB) and RGBS

Configuration Number of VS-1616V Units required

to make up a 16x16 Switcher

Composite

s-Video (Y/C)

YUV / RGB

RGBS

6.2.1

Configuring a 16x16 Y/C Switcher (2 Units)

Configure a 16x16 video matrix switcher for s-Video (Y/C) by combining 2

VS-1616V

switchers. Connect as in Figure 7, substituting the C unit for the U

unit and ignoring the V unit. Set the dipswitches as Figure 7 illustrates.

Connect the communication line via the RS-232

RS-485 control interface

as section 6.6 describes.

6.2.2

Configuring a 16x16 YUV/RGB Switcher (3 Units)

Configure a 16x16 video matrix switcher for YUV by combining

VS-1616V

switchers, as Figure 7 illustrates:

1 The front panel is not locked and the MATRIX and STATUS LCD Displays illuminate
2 For a description of how to connect the RS-485 connectors between the VS-1616V switchers, refer to section 6.6.2

Содержание VS-1616V


































































Результаты поиска

Содержание VS-1616V

Отзывы:

Похожие инструкции для VS-1616V

Бренды по названию

Популярные бренды

Kramer VS-1616V, Руководство пользователя

Результаты поиска

Содержание VS-1616V

Отзывы:

Похожие инструкции для VS-1616V

Бренды по названию

Популярные бренды