Kramer VS-1616V, Руководство пользователя

Страница: 11 / 65

Your Video Matrix Switcher
KRAMER ELECTRONICS, LTD.
6
Table 2: Front Panel VS-1616V 16x16 Video Matrix Switcher Features
# Feature Function
1 IR Receiver The red LED is illuminated when receiving signals from the Kramer Infra-red
remote control transmitter
2 Power Switch Illuminated switch supplying power to the unit
3 ALL Button Pressing ALL followed by an INPUT button, connects that input to all outputs
4 OFF Button An OFF - OUT combination disconnects that output from the inputs; an OFF - ALL
combination disconnects all the outputs
5 IN Buttons Select the input to switch to the output
6 OUT Buttons Select the output to which the input is switched
7 STO Button Stores the current setting in the non-volatile memory
8 RCL Button Recalls a setup from the non-volatile memory
9 LCD MATRIX
Display
1
Displays the selected input(s) switched to the output(s) (above or below the
corresponding OUTPUT label) and user interface messages
10 LCD STATUS
Display
1
Displays the matrix status
11 MENU Button Selects the programming commands to setup the switcher
12 TAKE LED Shows the current TAKE button mode aiding the completion of actions
13 TAKE Button Used to confirm and complete setup and switching
Table 3: Rear Panel VS-1616V 16x16 Video Matrix Switcher Features
# Feature Function
1 IN BNC Connector Connects to the external video sync source
2
S
Y
N
C
LOOP BNC Connector Connects to the SYNC IN connector on the next unit
3 TERM SYNC Button
Press to terminate at 75 or release for looping
2
4 EXT. (extension) KEYS
Terminal Block Connectors
Connects to an external keyboard (remote unit)
5 RS-485 Detachable Terminal
Block Port
Pins # 1 and # 2 are for vertical sync and Ground connection, and
Pins # 3 and # 4 are for RS 485
6 RS-232 IN DB 9F Port Connects to the PC or the Remote Controller
3
7 RS-232 OUT DB 9M Port Connects to the RS-232 IN DB 9F port of the next unit in the daisy-
chain connection
8 SETUP Dipswitches Dipswitches for setup of the unit
9 Power Connector with Fuse AC connector enabling power supply to the unit
10 TERM IN Buttons
Press to terminate at 75 or release for looping
4
11 IN BNC Connectors Connect to the video sources
12 OUT BNC Connectors Connect to the video acceptors
1 In sections 7.2.4 and 8, the word “Displays” refers to the LCD MATRIX and STATUS Displays
2 Push in to terminate the sync line. Push out when the sync line extends to another unit
3 If the unit is not the first unit in the line, connects to the RS-232 OUT DB 9F port of the previous unit in the line
4 Push in to terminate the input. Push out when the input extends to another unit (the last unit in the chain must be terminated
when looping)