Operating Your Video Matrix Switcher
KRAMER ELECTRONICS, LTD.
28
Figure 19: Default Startup Status Display Sequence
7.2 Using the Front Panel Buttons
You can switch (see section 7.2.2) and clear (see section 7.2.3):
One input to one output
Several inputs to several outputs
One input to all outputs
7.2.1
Confirming Settings
Choose to work in the
AT ONCE
mode or the
CONFIRM
mode:
In the
AT ONCE
(default
1
) mode:
Actions require no user confirmation
Execution is immediate
No protection is offered against changing an action in error
In the
CONFIRM
mode
2
:
You have an optional method to help avoid making a mistake
Every action requires user confirmation
Execution is delayed
3
until the user confirms the action
Protection is offered to prevent erroneous switching
You can key-in several actions and then confirm them by pressing the
TAKE button once, to simultaneously switch several monitors
1 For all actions except storing/recalling setups
2 The CONFIRM mode is the default for storing/recalling setups (see section 8.7)
3 Failure to press the TAKE button within 30 seconds to one minute (the Timeout) will abort the action