Kramer VS-1616DN-EM, Руководство пользователя

Страница: 88 / 156

Kramer Electronics Ltd.
VS-1616DN-EM
– Using the Input / Output Cards
85
Defining the AAD-IN2-F16 / AAD-OUT2-F16
The AAD-IN2-F16 is a 2-Input Analog & Digital Audio Card (F-16):
The AAD-OUT2-F16 is a 2-Output Analog & Digital Audio Card (F-16):
When a multi-channel audio input signal is routed to a card with digital and analog stereo
audio outputs, the digital connectors output multi-channel audio and the analog connectors
output the front right and front left audio channels only.
AAD-IN2-F16 / AAD-OUT2-F16 Configuration
The AAD-IN2-F16 configuration table appears as follows:
AAD-IN2-F16 Input Card
Parameter Description Default
Pattern RGB Bar, Black. RGB Bar
Reset Input Re-power
—Power cycles the port.
Factory Reset
—Performs a factory reset of the port to default values.
Re-
power
Audio
Select Selects the audio source:
Auto
—Audio signal selection is controlled by the presence or absence of a plug
in the RCA port. When present, AUD-Digital is selected, when absent, AUD-
Analog is selected.
AUD-Digital
—Digital audio is selected from the RCA ports.
AUD-Analog
—Analog audio from the 5-pin terminal blocks is selected.
Auto
Audio Mute MUTE
—Mutes the audio input.
Non-MUTE
—Unmutes the audio input.
Note : When set to Mute, any change to the audio parameters automatically
sets this to unmute.
Note : Not applicable when digital audio is selected.
Non-
MUTE
Volume Sets the audio output volume (0
–70).
Note : Not applicable when digital audio is selected. Applies to analog inputs
and outputs only.
50
Audio
Balance Sets the audio output channel balance (0
–100).
Note : Not applicable when digital audio is selected.
50
Audio Bass Sets the audio output bass level (0
–15).
Note : Not applicable when digital audio is selected.
7
Audio
Treble Sets the audio output treble level (0
–15).
Note : Not applicable when digital audio is selected.
7