Kramer VS-1616DN-EM, Руководство пользователя

Страница: 24 / 156

Kramer Electronics Ltd.
VS-1616DN-EM
– Operating – Front Panel Buttons
21
Turning an Output Off
Turning an output off means that there is no input switched to this output. This is indicated on
the display by the Input being blank underneath the relevant Output.
To turn an output off:
1. Press MENU.
The Menu buttons light and are enabled.
2. Press OFF (3) on the numeric keypad (see Figure 2 ).
The following message is displayed:
out__ => OFF
3. Use the numeric keypad to turn the required output off.
The output is turned off.
To turn an output off in the Confirm mode:
•
Repeat the steps above and then press the flashing TAKE button to confirm the action.
Alternatively, you can perform a switching operation (see Switching One Input to One
Output on page 20 ) and set the input to 00.
Turning Off Several Outputs
To turn off several outputs in the Confirm mode, repeat the switching actions described in
Switching Several Inputs to Several Outputs on page 20 but set the inputs to 00.
Recalling the Default Setup
You can store a commonly used setup as the default setup (see Config Menu
—Store Default
Setup on page 30 ) which can be recalled at any time.
This is not the setup that is loaded when the unit is turned on. When the unit is turned on, the
setup that was last used before the unit was turned off is loaded.
To recall the default setup:
1. Press DEFAULT SETUP.
The DEFAULT SETUP button flashes and the following message is displayed:
recall DEFAULT setup
press FLASHING button to confirm
2. Press DEFAULT SETUP.
The following message is displayed:
all Setups and Connections change
press TAKE to confirm
The TAKE button flashes.
3. Press TAKE.
The default setup is recalled and the display reverts to the output-input display.