Your VP-8x8A 8x8 VGA / UXGA / Audio Matrix Switcher
5
Table 2: Front Panel VP-8x8A 8x8 VGA / UXGA / Audio Matrix Switcher Features
#
Feature
Function
1 IR Receiver
The red LED is illuminated when receiving signals from the infra-red remote
control transmitter
2
POWER
Switch
Illuminated switch for turning the unit ON or OFF
3
SELECTOR OUT
Buttons
Select the output
1
to which the input is switched
4
SELECTOR IN
Buttons
Select the input
1
to switch to the output (after selecting an output)
When a signal is detected at an input connector, the corresponding input
button is illuminated
5
ALL
Button
Pressing
ALL
followed by an
INPUT
button, connects that input to all outputs
2
6
OFF
Button
Press an
OUT
SELECTOR button and then an
OFF
button to disconnect that
output from the inputs
Press the
ALL
button and then the
OFF
button to disconnect all the outputs
7
VIDEO
Button
When pressed
3
actions relate to video
8
AUDIO
Button
When pressed
4
actions relate to audio
9
AFV
Button
When pressed, the audio channels follow the video channels. The button is
illuminated when the AFV mode is selected
10
STO
(Store) Button
Pressing
STO
followed by an input/output button stores the current setting
5
11
RCL
(
Recall
) Button
Pressing the
RCL
button and the corresponding
IN
/
OUT
button recalls a
setup from the non-volatile memory. The stored status blinks. Pressing a
different
IN
/
OUT
button lets you view
6
another setup. After making your
choice, pressing the
RCL
button again implements the new status
12
TAKE
Button
Pressing
TAKE
toggles the mode between the Confirm mode
7
and the
At Once mode (user confirmation per action is unnecessary). When in
Confirm mode, pressing the TAKE button will implement a pending
configuration
13
- Button
Press to decrease the output audio signal level
14
AUDIO
LEVEL
+ Button
Press to increase the output audio signal level
15
LOCK
Button
Disengages the front panel switches
16
STATUS
7-segment
Display
Displays the selected INPUT switched to the OUTPUT (marked above each
input)
8
17
REL. AUDIO LEVEL
7-segment display
Displays the relative
9
audio level
10
1 From 1 to 8
2 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
3 The VIDEO button is illuminated when in breakaway mode and actions relate to video
4 The AUDIO button is illuminated when in breakaway mode and actions relate to audio
5 For example, press STO and then the output button # 3 to store in Setup # 3, or the input button 4 to store in Setup 12
6 Only view, nothing is implemented at this stage
7 When in the Confirm mode, the TAKE button illuminates
8 Also displays the number of INPUT and OUTPUT ports, the firmware version number, and the MACHINE #. Refer to
section 7.3.1
9 The audio level range is relative, since the audio input signal can be adjusted separately via trimmers on the rear panel
10 From –19 to +16