Kramer VP-771, Руководство пользователя

Страница: 25 / 77

20 VP-771 - The OSD Menu
Setting Function
Input Settings Set the:
H Image Shift – to set the horizontal position of the image within the window
M / P
Volatile parameter
V Image Shift – to set the vertical position of the image within the window
M / P
Volatile parameter
Auto Positioning – to search the input image during the tuning process and
automatically position it on the output window in a perfect fit.
Set to Off to disable auto positioning
Set to Normal Scan to perform a normal range image search
Set to Wide Scan to perform a wide range image search M / P
In the Normal/Wide Scan option, the machine automatically adjusts all the PC input
video resolutions (PC 1 and PC 2). For the other inputs, the machine automatically
adjusts all the input video resolutions except for HD/SD (CEA 861 standard) video
resolutions
HDCP Mode – to select the HDCP option for the HDMI input: either ON (the
default) or OFF.
Setting HDCP mode to Off on the HDMI input allows the source to transmit a
non-HDCP signal if required (for example, when working with a Mac
computer).
EDID Select – to select the native resolution on each input to be read by the
video source connected to that input: 1024x768@60, 1280x800@60,
1280x1024@60, 1366x768@60, 1440x900@60, 1400x1050@60,
1600x900@60, 1600x1200@60, 1680x1050@60, 1920x1200@60RB,
720p50, 720p60, 1080p50, 1080p60, 2K50 or 2K60
Note that when the EDID is set on the PC 1, PC 2 and DP inputs,
the changes are per input and immediate.
Setting the EDID on any one of the HDMI inputs affects that HDMI
input immediately (the VP-771 automatically issues a hot-plug) and
will affect the other HDMI video source only after a hot-plug
occurrence on that input.
For example, if the EDID is selected for HDMI2 it will affect the
HDMI2 input immediately; the HDMI1 EDID will take effect
following a hot-plug.
Color Space – to select the color space for the PC and HDMI inputs: RGB,
YPbPr or Follow Input (default)
Window
Customization
Select the position and the size of the selected window: H Position, H Width,
V Position and V Height (see Section 6.2.1.2 and Section 6.2.1.1 ) M / P
The value range is dynamic. The FW prevents windows from exceeding the
boundaries or over-sizing. The position and size of the windows are saved to the
system.
The size and position of the customized window (Main or PiP) remain valid even
when toggling the PIP button (front panel, remote control transmitter or protocol
command).
The customized setup is cancelled only by explicitly selecting a preset Display Mode
(see first item in this table) or if a new customized setup is created.
Use the front panel + and – buttons, IR remote control transmitter or Web page to
set the position and height of the Main and/or PiP windows
The PiP window maximum horizontal active image area is 1600
pixels
i
i