Kramer VP-730, Руководство пользователя

Страница: 15 / 66

Connecting Your VP-730 Presentation Switcher / Scaler
11
11
6 Connecting Your VP-730 Presentation Switcher / Scaler
To connect
1
Figure 3 the VP-730 as illustrated in the example in , do the
following
2
1. Connect the following video sources
:
3

A component video
:
4

A composite video source (for example, a DVD player) to the UNIV. IN
2 RCA connector Y/CV
source (for example, a DVD player) to the UNIV.
IN 1 RCA connectors, Y/CV, P
B
/C and P
R

A computer graphics source to the PC 1 IN 15-pin HD computer
graphics video connector

An HDMI source (for example, a DVD player) to the HDMI 1 IN connector

A graphics data source (for example, JPEG files from a PC or a USB
flash drive) to the USB connector on the front panel of the machine
5
2. Connect the balanced stereo audio sources
5,6

Component video source 1 to the AUDIO UNIV. IN 1 terminal block
that is, the audio of the:

Composite video source to the AUDIO UNIV. IN 2 terminal block

Computer graphics source to the AUDIO PC 1 terminal block
3. Connect the video output:

HDMI OUT connector to an HDMI acceptor (for example, a plasma display)

PC OUT 1 15-pin HD computer graphics video connector
7

PC OUT 2 15-pin HD computer graphics video connector
to a video
acceptor (for example, an analog display 1)
7
to a video
acceptor (for example, an analog display 2)
4. Connect
5
the AUDIO OUT 5-pin terminal block and/or the S/PDIF digital
audio output to audio acceptors.
5. Connect the SPKR OUT block connector to a pair of loudspeakers, by
connecting the left loudspeaker to the “L+” and the “L-” terminal block
connectors, and the right loudspeaker to the “R+” and the “R-” terminal
block connectors.
Do not Ground the loudspeakers .
6. Connect the power cord
5
,
8
7. If required, connect a PC via RS-232, see section
.
6.1 .
1 Although this example shows only several inputs that are connected, you can connect all the inputs simultaneously
2 Switch OFF the power on each device before connecting it to your VP-730. After connecting your VP-730, switch on its
power and then switch on the power on each device
3 You do not have to connect all the inputs
4 Sometimes called YUV, or Y, B-Y, R-Y, or Y, Pb, Pr
5 Not illustrated in Figure 3
6 As required. Not all devices need to be connected
7 In the HDTV mode, the signal goes out via three PINS: PIN 1 is Red or Pr, PIN 2 is Green or Y, PIN 3 is Blue or Pb
8 We recommend that you use only the power cord that is supplied with this machine