Kramer VP-725N, Руководство пользователя

Страница: 25 / 62

20 VP-725N - Operating the VP-725N Presentation Switcher/Scaler
Move the position of the PIP by :
• Using the OSD menu (see Section 7.1 )
Choose a new PIP source by :
• Pressing the "PIP Source" button on the remote control transmitter followed
by the button of the desired PIP input
• Pressing and holding down the PIP front panel button and then pressing the
button of the desired PIP input (while the PIP button is still pressed)
6.3 Locking and Unlocking the Front Panel
To prevent accidental changes to settings or unauthorized tampering with the front
panel, you can lock the front panel.
To lock the front panel, press and hold the ENTER front panel button for about 3
seconds. (This does not apply to the ENTER key on the infrared remote control
transmitter.)
The front panel buttons lock (except for the ENTER button on the front panel).
Operation via the infrared remote transmitter or RS-232 serial commands (remote controller or
PC) and/or ETHERNET is still available The LCD displays: Keypad Lock On.
To unlock the front panel buttons (releasing the protection mechanism), press and
hold the ENTER front panel button for about 3 seconds.
6.4 Freezing the Image
To freeze the image, press the Freeze key on the infrared remote control
transmitter (see
Figure 22 ) or the FREEZE front panel button.
The image freezes and the FREEZE front panel button illuminates.
The LCD displays: Freeze.
You can define the function of the FREEZE button (freeze and mute, freeze or
mute) via the OSD menu.
6.5 Displaying a Blank Screen
To display a blank screen, press the Blank key on the infrared remote control
transmitter (see
Figure 22 ). You can set the blank color to blue or black and also
define the function of the Blank key via the OSD menu (blank and mute, blank or
mute.)