KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your Presentation Matrix Switcher
10
#
Feature
Function
22
COMP AUDIO IN Terminal Block Connectors Connect to the component video balanced audio sources
1
23
VGA/UXGA
IN HD15 Connectors
Connect to the VGA/UXGA video sources
2
24
OUT HD15 Connectors
Connect to the VGA/UXGA video acceptors
1
25
CV
IN BNC Connectors
Connect to the composite video sources
2
26
OUT BNC Connectors
Connect to the composite video acceptors
1
27
Y/C
IN 4-pin Connectors
Connect to the s-Video sources
2
28
OUT 4-pin Connectors
Connect to the s-Video acceptors
1
29
COMP
Y IN RCA Connectors
Connect to the component (Y, P
B
/C
B
,
P
R
/C
R
) video
sources (1 and 2)
30
P
B
/C
B
IN
RCA Connectors
31
P
R
/C
R
IN
RCA Connectors
32
Y OUT RCA OUT Connectors
Connect to the component (Y, P
B
/C
B
,
P
R
/C
R
) video
acceptors (1 and 2)
33
P
B
/C
B
OUT
RCA Connectors
34
P
R
/C
R
OUT
RCA Connectors
35 CAT 5 VGA 2 OUT
3
Twisted Pair Connector
Connect to a remote computer graphics acceptor via
a receiver (for example, the TP-122
4
)
36 FLASH PROG. Button
Push in for “Program” to upgrade to the latest Kramer
firmware (see section 8), or release for Normal (the
factory default)
37 Power Connector with Fuse
AC connector enabling power supply to the unit
Figure 3
and
Table 4
define the
VP-26
underside features:
Figure 3: VP-26 Presentation Switcher / Controller – Underside View
Table 4: VP-26 Underside Panel Features
#
Feature
Function
1 HS
Switch
Slide the switch to the right (to NORMAL) to retain the polarity
Slide the switch to the left
5
to change the HS polarity to NEGATIVE polarity
6
2
VS Switch
Slide the switch to the right (to NORMAL) to retain the polarity
Slide the switch to the left
5
to change the VS polarity to NEGATIVE polarity
6
1 From 1 to 2
2 From 1 to 4
3 The CAT5 outputs the VGA/UXGA OUT 2 signal only
4 See section
6.1
5 By default, both switches are set to the right
6 Downgoing syncs
