Kramer VP-23DS, Руководство пользователя

Страница: 8 / 29

Your VP-23DS Presentation Switcher / Scaler
5
Table 1: Front Panel VP-23DS Presentation Switcher / Scaler Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 FOLLOW Press
2
so that the scaler output will follow the last
selected video input
Release to select the scaler output independently (by
pressing the CV, Y/C or VGA/UXGA scaler buttons)
3 CV Press to route the selected CV input to the scaled
3
output
4
4 Y/C Press to route the selected Y/C input to the scaled
3
output
4
5
MODE -
INPUT
Buttons
VGA/UXGA Press to route the selected VGA/UXGA input to the
scaled output
4
Note that the VGA/UXGA is not scaled. It is routed
directly to the scaled output
6 VGA Press to select the VGA (640x480) output resolution
7 SVGA Press to select the SVGA (800x600) output resolution
8 XGA Press to select the XGA (1024x768) output resolution
9
SCALER
1
RES
Buttons
WXGA Press to select the WXGA (1366x768) output resolution
10 VIDEO (CV) Buttons Select the composite video and audio input (from 1 to 2)
11 s-VIDEO (Y/C) Buttons Select the s-Video and audio input (from 1 to 2)
12
INPUT
SELECTOR
VGA/UXGA Button Select the VGA/UXGA video and audio input (from 1 to 4)
13 - Button Decrease the master audio signal level
14
MASTER
+ Button Increase the master audio signal level
15 + Button Increase the microphone audio signal level
16
AUDIO
LEVEL
MIC
- Button Decrease the microphone audio signal level
17 MUTE Button Press to disable/enable the Master Audio output
5
18 MIX Button Press to toggle. When on, will mix the microphone signal
with the Master Audio output
6
. When OFF, the
microphone signal is not available at the master audio
output
19 LOCK Button Press and hold
7
to lock/unlock the front panel buttons
1 See section 7.2
2 Button illuminates
3 Scaled according to the resolution selected using the RES button
4 In the FOLLOW mode, the button illuminates if this is the last input routed to the master output. In the breakaway mode,
press to select the input to route to the scaler output
5 Except for the microphone signal in the MIX mode
6 When the MUTE button and the MIX button are on, only the microphone signal is transferred to the output
7 For about 2 seconds