KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-23DS Presentation Switcher / Scaler
12
When setting the master audio gain to its minimum, the MUTE button illuminates.
When MIX is OFF, then the microphone signal is not available at the master
audio output.
When MIX is ON and MUTE is OFF, the microphone signal is mixed with the
master audio output.
When both the MUTE and MIX buttons are ON, only the microphone signal
is transferred to the master output.
The MUTE and MIX buttons can be turned ON or OFF via RS-232 control
and their respective buttons on the front panel illuminate.
7.2 Operating the Scaler Section
The SCALER section can operate in the FOLLOW or the breakaway mode:
In the FOLLOW mode, the FOLLOW button illuminates, and the Scaler
output follows the last selected video input
For example, if the last selected input is VIDEO (CV) 2, its INPUT
SELECTOR button is illuminated (in purple) and in the SCALER
section, the CV button illuminates (as well as the FOLLOW button)
indicating that CV INPUT 2 is scaled and routed to the SCALER output
In the Scaler breakaway mode, the FOLLOW button is not illuminated
and the input to the SCALER output is selected by pressing appropriate
SCALER button
For example, if the last selected master output is s-VIDEO (Y/C) 2,
select the Scaler output by pressing one of the three SCALER buttons:
CV, Y/C or VGA/UXGA
You can select the desired Scaler output resolution by pressing one of the four
resolution buttons: VGA, SVGA, XGA or WXGA.
