Connecting the VP-23DS Presentation Switcher / Scaler
9
6. If required, connect a dynamic or a condenser microphone
1
to the MIC IN
6.3mm phone jack connector.
7. As an option, you can connect a PC and/or controller to the RS-232 port (see
section 6.1).
8. Connect the power cord (not shown in Figure 2).
Figure 2: Connecting the VP-23DS Presentation Switcher / Scaler
1 Use the DYN / COND MIC switch (on the rear panel) to select a dynamic microphone or a condenser
