![background image](http://html1.mh-extra.com/html/kramer/vm-4hdt/vm-4hdt_user-manual_2000669011.webp)
Kramer Electronics Ltd.
VM
‑
4HDT
,
VM
‑
3HDT
,
VM
‑
2HDT
– Operating the VM
‑
4HDT, VM
‑
3HDT and VM
‑
2HDT
9
Operating the VM
‑
4HDT,
VM
‑
3HDT and VM
‑
2HDT
This section describes the following functions
•
•
IR and RS-232 Signal Routing
The
VM
‑
4HDT
can send or receive IR and RS-232 commands via the four HDBT output
ports.
Each signal can pass commands from the
VM
‑
4HDT
to a single output, several outputs or all
of the outputs or the other way around, from the output/s to the
VM
‑
4HDT
.
The IR/RS-232 signal routing is enabled via the SETUP DIP-switches
).
Setting the DIP-Switches
This section defines the SETUP DIP-Switches:
Figure 7: VM
‑
4HDT DIP-Switches
Output #
IR Routing is
enabled when:
RS-232 Routing is
enabled when:
OUT 1
DIP 1
– OFF
DIP 5
– OFF
OUT 2
DIP 2
– OFF
DIP 6
– OFF
OUT 3
DIP 3
– OFF
DIP 7
– OFF
OUT 4
DIP 4
– OFF
DIP 8
– OFF