Kramer Electronics Ltd.
VM
‑
4HDT
,
VM
‑
3HDT
,
VM
‑
2HDT
– Introduction
2
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the Kramer Electronics input power wall adapter that is provided
with the unit.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce
the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected
and recycled. To comply with the WEEE Directive, Kramer Electronics has made
arrangements with the European Advanced Recycling Network (EARN) and will cover any
costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on
arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular
country go to our recycling pages at
http://www.kramerelectronics.com/support/recycling/
Overview
Congratulations on purchasing your Kramer
HDMI to HDBT DA
.
VM
‑
4HDT
is a high-quality, long-reach HDBaseT extender and distributor that takes
HDMI, IR
and RS-232 signals, and
converts and distributes them to 4 HDBaseT outputs. The
VM
‑
4HDT
supports HDMI resolutions up to 4K@60 (4:2:0), and the outputs can be connected to
compatible HDBaseT receivers such as the
TP-580R
.
VM
‑
3HDT
and
VM
‑
2HDT
also include an HDMI LOOP output for connecting to an additional
unit in a daisy chain.
VM
‑
4HDT
provides exceptional quality and advanced and user-friendly operation.
Exceptional Quality
•
High Performance Distribution
– Distributes one HDMI signal to four long-reach
HDBaseT extension outputs with up to 4K video resolution.
•
Extension-line Distribution
– Distributes a 4K@60Hz (4:2:0) 24bpp (maximum) video
signal over HDBaseT extension line to a distance of up to 40m (130ft) long-reach, and
even further for lower video resolutions.
•
HDMI Signal Transmission
– HDMI 2.0 and HDCP 1.4 compliant signal, supporting Deep
Color, x.v.Color™, Lip Sync, 7.1 PCM, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D. EDID
and CEC (OUT 1 only) signals are passed through from the source to the display.
For
VM
‑
2HDT
and
VM
‑
3HDT
, CEC is passed from the LOOP OUT to the HDBT
OUT 1 and to the display on the connected receiver.