Kramer Electronics Ltd.
TP-594Txr, TP-594Rxr
– Protocol 3000
62
Function
Description
Syntax
Parameters/Attributes
Example
X-CEC-
MEMBERS?
TP-594Rxr
Get CEC members list of
a given output signal.
This syntax uses the
new convention of using
brackets to define a list of
fields “[ ]”.
This is an Extended
Protocol 3000 command.
COMMAND
#X-CEC-
MEMBERS?
<direction_type>
.
<port_type>
.
<port_index>
.
<sign
al_type>
.
<index>
<CR>
FEEDBACK
~nn@X-CEC-
MEMBERS
<direction_type1>
.
<port_type1>
.
<port_index1>
.
<sig
nal_type1>
.
<index1>
,
[<logical_id1>
,
<logical_id2>
, .. ,
]
<
CR><LF>
The following attributes comprise the
primary signal ID (suffix 1) and CEC
members list (logical ID list):
▪
<direction_type>
– IN
▪
<port_type>
–
o
HDMI
▪
<port_index>
– The port
number as printed on the front or
rear panel
▪
<signal_type>
–
o
VIDEO
▪
<index>
– Indicates a specific
channel number when there are
multiple channels of the same
type
▪
L
ogical_id
– CEC logical ID value (0-
15)
Get the CEC members list of
HDMI 1 input signal:
#X-CEC-
MEMBERS?
IN
.
HDMI
.
1
.
VIDE
O
.
1
<CR>
X-CEC-GW-
MEMBER
TP-594Rxr
Set CEC gateway
member ID for a given
output signal.
Note: Member ID 0 is
reserved for "TV" only.
This syntax uses the
new convention of using
brackets to define a list of
fields “[ ]”.
This is an Extended
Protocol 3000 command.
COMMAND
#X-CEC-GW-
MEMBER
<direction_type>
.
<port_type>
.
<port_index>
.
<signal
_type>
.
<index>
<CR>
FEEDBACK
~nn@X-CEC-GW-
MEMBER
<direction_type1>
.
<port_type1>
.
<port_index1>
.
<sign
al_type1>
.
<index1>
,
<logical_id>
<CR><LF>
The following attributes comprise the
primary signal ID (suffix 1) and CEC
gateway member ID (logical ID):
<direction_type>
– IN
<
port_type>
–
o HDMIo
<port_index>
– The port number
as printed on the front or rear panel
<signal_type>
–
o VIDEO
<index>
– Indicates a specific
channel number when there are
multiple channels of the same type
Logical_id
– CEC logical ID
value (1-15)
Set the CEC gateway member
ID 14 of HDMI 1 input signal:
#X-CEC-GW-
MEMBER
IN.HDMI.1.VIDE
O.1,14
<CR>
X-CEC-GW-
MEMBER?
TP-594Rxr
Get CEC gateway
member ID for a given
output signal.
This syntax uses the new
convention of using
brackets to define a list of
fields “[ ]”.
This is an Extended
Protocol 3000 command.
COMMAND
#X-CEC-GW-
MEMBER?
<direction_type>
.
<port_type>
.
<port_index>
.
<signal_
type>
.
<index>
<CR>
FEEDBACK
~nn@X-CEC-GW-
MEMBER
<direction_type1>
.
<port_type1>
.
<port_index1>
.
<signa
l_type1>
.
<index1>
,
<logical_id>
<CR><LF>
The following attributes comprise the
primary signal ID (suffix 1) and CEC
gateway member ID (logical ID):
▪
<direction_type>
– IN
▪
<port_type>
–
1o
HDMI
▪
<port_index>
– The port
number as printed on the front or
rear panel
▪
<signal_type>
–
o
VIDEO
▪
<index>
– Indicates a specific
channel number when there are
multiple channels of the same
type
▪
L
ogical_id
– CEC logical ID value (1-
15)
Get the CEC gateway member
of HDMI 1 input signal:
#X-CEC-GW-
MEMBER
IN.HDMI.1.VIDE
O.1,14
<CR>
X-UPGRADE
TP-594Txr
TP-594Rxr
Use to upgrade the
firmware (see
).
This syntax uses the
new convention of using
brackets to define a list of
fields “[ ]”.
This is an Extended
Protocol 3000 command.
COMMAND
#X-UPGRADE
<direction_type>
.
<port_type>
.
<port_index>
,
<file
_name>
<CR>
The following attributes comprise the
primary signal ID (suffix 1) and CEC
gateway member ID (logical ID):
<direction_type>
– IN
<
port_type>
–
o USB_PORT
<port_index>
– 1
<
file_name
– CEC logical ID
value (1-15)
Perform FW upgrade for
TP-
594Txr:
#X-UPGRADE
IN.USB_POR
T.1,TP-
594TXR_All*.Bin
<CR>
Perform FW upgrade for
TP-594Rxr:
#X-UPGRADE
IN.USB_POR
T.1,TP-
594RXR_All*.Bin
<CR>
DRAFT
