Kramer Electronics Ltd.
TP-594Txr, TP-594Rxr
– Routing Audio Signals
14
6. Under Audio Settings:
▪
Set Audio De-embedding Source to
Line-HDMI IN
.
▪
Set Audio De-embedding Destination to
Analog OUT
.
When Audio De-embedding Source and/or Destination are set to
None
, the
AUDIO analog out port is muted.
Figure 11: TP-594Rxr Video and Audio Page
– HDMI Audio to Receiver Settings
If ARC Output Source is set to
Analog IN
, the above settings are automatically set to
None
and analog output is disabled.
The
TP-594Txr
HDMI audio input is routed to the
TP-594Rxr
HDMI and analog audio outputs.
Routing a Priority-Selected Audio Source to the Receiver
To set a priority-selected analog audio source automatically:
1. Connect an analog audio source to the AUDIO 5-pin terminal block connector and/or the
HDMI connector.
2. In the
TP-594Txr
Navigation pane, click
Video & Audio
. The Video and Audio settings
page appears.
3. Under Audio Settings:
▪
Set Audio Embedding Selection Mode to
Auto
.
▪
Set Audio Embedding Selection Priority to
Analog/HDMI
.
In this example, the audio embedding source priority is set to analog; if the HDMI
source is connected and the analog audio source is then connected, the audio
embedding source switches automatically to analog.
▪
View the active audio Current Selection (Embedded in this example).
When AUDIO on the
TP-594Txr
is set to
Analog
, ARC cannot be output via the analog
AUDIO port.
Figure 12: TP-594Txr Video and Audio Page
– Auto Priority Audio Settings
4. In the
TP-594Rxr
Navigation pane, click
Video & Audio
. The Video and Audio settings
page appears.
DRAFT
