Kramer TP-594Rxr, Руководство пользователя

Страница: 33 / 67

Kramer Electronics Ltd.
TP-594Txr, TP-594Rxr
– Using the Embedded Web Pages
31
3. Click OK .
4. If DHCP is OFF , change any of the static IP parameters (Static IP Address, Netmask
and/or Gateway).
5. Click Set Changes .
•
After changing the
IP Address, or DHCP to ON
, reload the Web page with the new IP
address.
•
After changing the Subnet mask, turn the
TP-594Txr
/
TP-594Rxr
power off and then
on again.
Any change in the device settings requires confirmation, as illustrated in the example in
Figure 35 .
Figure 35: The Device Settings Page
– Static IP Setting Confirmation
6. Click OK .
Ethernet parameters are changed.
Viewing HDBT Settings
View HDBT Extra Range settings as set by the DIP-switches (see Setting the DIP-Switches
on page 22 ).
Upgrading the Firmware
To upgrade the firmware:
1. In the Navigation pane, click Device Settings . The Device Settings page appears.
2. Click Choose File in the Firmware update line. An Open window appears.
3. Select the correct firmware file from the PC that is connected to the device.
Each device has its own firmware file.
4. Click Open . The selected file appears in the Firmware Update line.
DRAFT