Kramer TP-594Rxr, Руководство пользователя

Страница: 42 / 67

Kramer Electronics Ltd.
TP-594Txr, TP-594Rxr
– Using the Embedded Web Pages
40
3. When Control Gateway Status is enabled, perform the following operations:
▪
Route RS-232 port control communication via Gateway or via HDBT-Line (default)
extension.
When routing commands via gateway, and sending replies to a new client is
enabled (see
Setting TP-594Rxr Gateway Serial Port Settings on page 41 ),
RS-232 responses are sent to other gateway Clients too.
▪
Route IR port control communication via Gateway or HDBT-Line (default) extension.
▪
Route CEC port control communication either via Gateway and HDBT-Line (both
are active) or only via HDBT-Line (default) extension (gateway CEC communication
is blocked).
When control gateway is enabled and CEC (HDMI) port control communication is via
Gateway , define the following CEC-enabled controI gateway attributes:

Enter the CEC logical address (14, by default) of the control gateway.

View the list of logical addresses for CEC-enabled devices connected on HDMI
line as members of the CEC control channel.

Click CEC List Refresh to update the logical address list of CEC members.
According to HDMI CEC standard, for proper identification during CEC control
communication, each CEC-enabled member of the CEC control channel, is assigned a CEC
logical address.
Sending Commands Manually via Gateway
Use Manual Control to manually control a peripheral device that is connected to TP-594Rxr ,
via RS-232, IR or HDMI-CEC control ports.
Before manually controlling via RS-232 port, you need to define it as a control gateway serial
port (see
Setting TP-594Rxr Gateway Serial Port Settings on page 41 ).
To send commands manually:
1. In the Navigation pane select Control Gateway . The Gateway & Ports Activation page
appears.
2. Under Manual Control, select the Control Port (RS-232, IR or CEC).
3. Enter a Hex command.
DRAFT